Skip to main content

Setting Up and Managing Smart Panels for Video Alarms

Learn how Site Admins pair a smart panel (an iPad running the Coram Alarms app) with a location, lock it with Guided Access, check its status, and manage PINs.

🔎 At a Glance

A smart panel is an iPad running the Coram Alarms app. It gives the people at a location a quick way to arm and disarm alarms there. Each person signs in on the smart panel with their own 4-digit PIN and sees only the alarms they can operate at that location.

​

This article is for Site Admins. It explains how to pair a smart panel with a location, lock it to the Coram Alarms app with Guided Access, check that each smart panel is ready, unpair a smart panel, and manage the PINs people use to sign in.

​

For using a smart panel to arm and disarm alarms, refer to Arming and Disarming Video Alarms on a Smart Panel. For what Video Alarms is and how alarm events work, refer to Introduction to Coram Video Alarms.


​

⚡ Key Tasks

  • Pair a Smart Panel
    Open the Coram Alarms app on the smart panel, then enter the code it shows in Alarms > Smart Panels > Add Smart Panel.

  • Turn On Guided Access
    Lock the smart panel to the Coram Alarms app so no one can switch to another app.

  • Check Each Smart Panel's Status
    The Status column shows whether each smart panel is online and locked to the Coram Alarms app.

  • Unpair a Smart Panel
    Stop a smart panel from working. No alarm is armed or disarmed.

  • Manage PINs
    Send, reset, or remove a person's PIN on the PINs tab.

For detailed information, keep reading below.


​

Overview

A smart panel is an extra place to arm and disarm alarms. Everything else stays in the Coram web app, including creating alarms and following events on the Activity page.

  • Pairing: You link each smart panel to one location with a single-use pairing code. The smart panel then works with that location's alarms.
    ​

  • PINs: Each person has one personal PIN. It works on every paired smart panel in your organization, and Coram emails it to them.
    ​

  • What each person sees: After signing in, a person sees only the alarms at that location whose User Access list includes them.
    ​

  • Guided Access: An iPad setting that keeps the Coram Alarms app on screen and blocks other apps from opening. Coram shows whether it is on for each smart panel.


​

What You'll Need

  • An iPad: Running iPadOS 17 or later, with an internet connection.
    ​

  • The Coram Alarms app: Installed on the iPad from the App Store.
    ​

  • The Site Admin role in Alarms: Only Site Admins see Smart Panels in Alarms.
    ​

  • Alarms at the location: People can operate only the alarms at the smart panel's location whose User Access list includes them. To learn more, refer to Creating and Managing Video Alarms.
    ​

  • Power: The Coram Alarms app keeps the iPad's screen on while it is open, so keep the iPad plugged in.


​

Pairing a Smart Panel

Pairing links a smart panel to one location. You do it once for each smart panel.

​

Before you begin, ensure the following:

  • You are a Site Admin.
    ​

  • The Coram Alarms app is installed on the iPad, and the iPad is connected to the internet.
    ​

  • You know which location the smart panel is at.

To pair a smart panel:

  1. On the smart panel, open the Coram Alarms app. It shows Your pairing code, a code that starts with ALA-, and how long until the code expires.

    A screenshot that shows the Coram Alarms app on an iPad with its pairing code.
    ​

  2. Access the Coram web app and sign in to your account.
    ​

  3. In the main navigation menu, click the Coram logo, then select Alarms.
    ​

  4. Click Smart Panels, then click Add Smart Panel. The Add Smart Panel drawer appears.
    ​

  5. In Pairing Code, enter the 8 characters that follow ALA- on the smart panel.
    ​

  6. In Smart Panel Name, enter a name your team will recognize, such as Front Desk.
    ​

  7. From the Location dropdown menu, select the smart panel's location.
    ​

  8. Click Pair Smart Panel.

A message confirms that the smart panel is paired, and it appears in the list. On the smart panel, check that the right location's name appears, with Tap anywhere to enter your PIN below it.

Notes:

  • Each code works once and expires after 5 minutes. If it expires, the Coram Alarms app shows a new code.
    ​

  • Keep the Coram Alarms app open on the smart panel until pairing is done. If you close it, the code stops working, and a new one appears when you open it again.
    ​

  • If the code is wrong or has expired, a message tells you that the code didn't work. Check the code on the smart panel and try again.
    ​

  • You can't rename a paired smart panel or move it to another location. To change either, unpair it and pair it again.


​

Turning On Guided Access

Guided Access is an iPad setting that keeps the Coram Alarms app on screen and blocks other apps from opening. Turn it on for every paired smart panel, so the smart panel is always ready for the next person.

​

Before you begin, ensure the following:

To turn on Guided Access:

  1. On the iPad, set up Guided Access and choose a Guided Access passcode, as Apple's article describes.
    ​

  2. Open the Coram Alarms app.
    ​

  3. Start a Guided Access session in the Coram Alarms app, as Apple's article describes.
    ​

  4. In the Coram web app, go to Alarms > Smart Panels and check that the smart panel's Status shows Online.

The smart panel stays in the Coram Alarms app until someone ends the Guided Access session.


​

Checking Each Smart Panel's Status

In Alarms > Smart Panels, the Smart Panels tab lists every paired smart panel with its location, status, Guided Access state, last contact, and the date it was paired. The list refreshes on its own every 30 seconds. To see a smart panel's app version as well, click Details on its row.

Status

Meaning

What to do

Online

The smart panel is connected to Coram, and Guided Access is on.

Nothing.

Guided Access off

The smart panel is connected, but Guided Access is off, so someone could leave the Coram Alarms app.

Start Guided Access on the smart panel.

Guided Access unknown

The smart panel is connected, but it has not said whether Guided Access is on.

Check the smart panel.

Offline

The smart panel has not contacted Coram for more than 90 seconds.

Check that the smart panel is on, connected to the internet, and showing the Coram Alarms app.

Not connected yet

The smart panel is paired, but it has not connected to Coram since.

Open the Coram Alarms app on the smart panel.

Status unavailable

This page could not refresh, so it can't confirm the smart panel's status. It does not mean the smart panel is offline.

Check your own connection and reload the page.

​

Note: Coram does not notify you when a smart panel goes offline or Guided Access is turned off, so check this page from time to time. An offline smart panel does not change any alarm. Armed alarms keep watching, and people can still arm and disarm in the Coram web app.


​

Unpairing a Smart Panel

Unpair a smart panel you no longer use, or before you move it to another location.

​

Before you begin, ensure the following:

  • You are a Site Admin.

To unpair a smart panel:

  1. In Alarms > Smart Panels, click Details on the smart panel's row. The Smart Panel Details drawer appears.
    ​

  2. Click Unpair. The Unpair Smart Panel? dialog appears.
    ​

  3. Click Unpair.

The smart panel stops working immediately and shows a new pairing code. No alarm is armed or disarmed. To use the smart panel again, pair it with the new code.


​

How People Get Their PINs

Each person signs in on a smart panel with a personal 4-digit PIN. One PIN works on every paired smart panel in your organization.

  • When Coram sends a PIN: When someone is added to an alarm's User Access list and has no PIN yet, Coram emails them one.
    ​

  • The email: The subject starts with "Your Coram Alarms PIN", followed by your organization's name. After a reset, it starts with "Your new Coram Alarms PIN". The email asks them to keep the PIN to themselves.
    ​

  • When a PIN stops working: Removing someone from an alarm's User Access list does not remove their PIN; they no longer see that alarm on the smart panel. If they lose access to Alarms, their PIN stops working.


​

Managing PINs

The PINs tab lists everyone with access to Alarms, the alarms whose User Access list includes them, and when their current PIN was sent. No PIN means the person does not have one.

Action

Shown when

What happens

Send PIN

The person has no PIN.

Coram creates a PIN, shows it to you once, and emails it to them.

Reset PIN

The person has a PIN.

Their current PIN stops working immediately. Coram creates a new one, shows it to you once, and emails it to them.

Remove Smart Panel Access

The person has a PIN.

Their PIN stops working on every smart panel. They keep their access to Alarms in the Coram web app. Coram does not email them a new PIN when they're added to more alarms; to give them one, click Send PIN.

​

Before you begin, ensure the following:

  • You are a Site Admin.

To send, reset, or remove a PIN:

  1. In Alarms > Smart Panels, click the PINs tab.
    ​

  2. On the person's row, click the actions menu (⋯), then select Send PIN, Reset PIN, or Remove Smart Panel Access.
    ​

  3. If a dialog asks you to confirm, click Reset PIN or Remove.
    ​

  4. If the New PIN dialog appears, give the PIN to the person if they need it now, then click Done. You won't see the PIN again after you close the dialog.

The person's row updates. After Send PIN or Reset PIN, the person also gets the PIN by email.

Tip: If someone else may know a person's PIN, reset it.


​

Did this answer your question?